CYCLUS TOOLS dual disc mount facing tool IS2000, Postmount and Flat Mount
The dual disc mount facing tool can be used universally by simply changing the facer and clamping position. It mills 100% even, at a 90° angle. The exact 90 ° angle and the parallelism of the disc brake mounts are ensured by the fact that the facer is clamped only once and both disc brake mounts are milled simultaneously.
This is the only way to guarantee an absolutely identical milling depth, which is a prerequisite for the correct assembly and proper functioning of the disc brake. Before you clamp the face milling machine, you must check the parallelism of the dropouts, as only then a perfect milling of the disc brake mount is guaranteed.
• The tool is delivered in the standard configuration for the quick release (QR) and 20 mm thru axle. NB: an adapter is needed to use the face milling tool with a 12 mm or 15 mm thru axle, that is Cyclus Tools art. 720962
• This tool comes with a facer pair Flat Mount (spare parts): art. 720958
Flat Mount Front
for front disc brake / front brake caliper mount
according to flat mount standard
Flat Mount Rear
for rear-wheel disc brake / rear brake caliper mount
according to flat mount standard
Post Mount
for disc brake / caliper mount
according to postmount standard
Diameter of the brake disc 140-203 mm
(nominal size: 5-8 inches)
International Standard 2000 (IS2000)
for disc brake / caliper mount
according to IS2000 standard
Diameter of the brake disc 140-203 mm
Optional accessories:
Optionales Zubehör:
CYCLUS TOOLS milling cutter pair (Ø 12 mm, height 15 mm) Art. 720237
milling cutter pair with carbide plates for carbon fibre Art.-Nr. 720238
guide for quick release (QR) VR Art.Nr. 720960
guide for quick release (QR) HR Art.Nr. 720961