CYCLUS TOOLS Worklift´r 2.0 | hydraulic assembly stand for bicycles/e-bikes/load bikes.
E-bikes often cause problems when clamping in an assembly stand. High weight and unconventional frame shapes thwart clamping attempts with classic bicycle holding clamps.
Cyclus Tools offers a professional solution with the Worklift'r 2.0. E-bikes, cargo bikes and even conventional bikes are quickly lifted into an ergonomic working position. The clever drive-on ramp allows bikes up to 30 kg net weight to be lifted with little effort. The adapter system with different plug-in adapters enables secure fixing of different axle mounts. The swivelling and height-adjustable bottom bracket support is a safe support for the bottom bracket. If this cannot be used (e.g. with a mid-engine model), the bicycle is supported using the rear wheel. The rear wheel sits on the adjustable support rollers and remains fully mobile, as is necessary, for example, when adjusting the gears and testing the drive system.
The right working height is the basis for safe, ergonomic and effective work. The desired working height is set in seconds using the foot pedal. Tool holders on the side keep the required tools within easy reach.
The Worklift'r can carry a maximum load of 100 kg. Two steered wheels allow easy manoeuvring. The parking brake ensures a stable stand.
Features:
⦁ Work surface can be extended on both sides, e.g. for cargo bikes.
⦁ Hydraulically height-adjustable for ergonomic work
⦁ Flexible working on the bicycle due to 360° degree mounting
⦁ Adjustment of e-bike motors possible through rear roller on stand
⦁ Up to 100 kg load capacity
⦁ Clamping of front wheels by means of adapters
⦁ Support for bottom bracket housing
⦁ easy mounting of the wheels due to
⦁ practical loading ramp
⦁ parking brake for stable stand
⦁ 2 articulated wheels for easy manoeuvring
⦁ Everything at hand: large storage area for tools & spare parts
⦁ Length incl. loading ramp 2450 mm
⦁ Height of tool tray min. 290 mm
⦁ Height of tool tray max. 830 mm
⦁ Width 500 mm | Length 800 mm
⦁ incl. plug-in adapter A / short 290011 and plug-in adapter B / short, slotted 290012
Further plug-in adapters available, per piece:
⦁ 290013 Plug-in adapter C / long
⦁ 290014 Plug-in adapter D / long, slotted
⦁ 290015 Plug-in adapter E
⦁ 290016 Plug-in adapter F / plug-in axle